EVA, TPN Bag, Internal Thread, 500 mL

The Antibacterial/Antiviral filter, with a luer lock gas sample port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit has an active humidifier

EXACTAMIX Empty EVA (ethylene vinyl acetate) Bag, 3000 mL. Used for large-volume sterile solutions. Non-reopening clamp attached. For use with EXACTAMIX Compounder. Attached Bag Clamp. Sterile Fluid Path. Non-DEHP. Material per IFU: Bag: Ethylene-vinyl acetate (EVA) Fill Port: Tube: EVA Connector/Cap: acrylonitrile butadiene styrene (ABS) Administration Port: EVA: DEHP-free polyvinyl chloride (PVC) Additive Port: Tube: EVA Septum: Poly-isoprene rubber Cap / Septum retaining ring: polypropylene Non-Reopening Clamp: Styrene-butadiene copolymer

Sterile EXACTAMIX 2400 Valve Set. For use with EXACTMIX 2400 Compounder only. Used to connect up to 24 Source Ingredients. Sterile. Non-DEHP. Material per IFU: Port Caps: PVC (polyvinyl chloride)

Pharmacy Bottle Cap, Size I, 38 mm, Purple. Non-Sterile. ENFit Syringe Compatible

The single use filter is used when canopy mode or mask mode testing is performed with the QNRG+ Metabolic Monitor. The purpose of the filter is to avoid cross-contamination. Inquiries regarding PVC/DEHP status should be referred to COSMED.

Tandem Carrier for IV Pole for SIGMA Spectrum Infusion System.

EXACTAMIX Large Bore Cap, External Thread. Threaded cap for closing container-filling tubes and bag ports. Sterile. Non-DEHP. Material per IFU: Acrylonitrile butadine styrene (ABS)

Automated Compounding Device Inlet. Micro-Volume Inlet with Large Bore Spike. Tubing set with push-on connector on one end to attach to the valve set and a large bore spike on the opposite end to attach the source container. For use with EXACTAMIX Compounders. Sterile. Non-DEHP. Material per IFU: Inlet Connector: ABS Tubing: Non-DEHP PVC Outlet Connector: TPE Materials: Acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), thermoplastic elastomer (TPE), polycarbonate (PC)

EVA Dual Chamber Empty Container, 1500 mL Total Capacity. 250 mL upper chamber, 1250 mL lower chamber. For use in the administration of intravenous solutions. Sterile. Non-DEHP. Material per IFU: Bag: Ethylene-vinyl acetate (EVA) Fill Port: Tube: EVA Connector/Cap: acrylonitrile butadiene styrene (ABS) Administration Port: EVA: DEHP-free polyvinyl chloride (PVC) Additive Port: Tube: EVA Septum: Poly-isoprene rubber Cap / Septum retaining ring: polypropylene Non-Reopening Clamp: Styrene-butadiene copolymer

REPEATER Pump Bag Pole. Stainless steel pole connects to the REPEATER Pump to hold a bag and tube set. Insert the straight length of pole into the vertical mount hole, adjust to desired height, and tighten thumbscrew.

When there is an active heated humidifier, the Ventilator Mode test can also be performed using the ICU Patient Connector and the Hydrophobic Filter. The ICU Patient Connector replaces the Standard Filter minimizing dead space and resistance added to the circuit and thus improving patient comfort. The Hydrophobic Filter is then required to prevent water condensation to get into the device, due to the absence of the Standard Filter. Reusable: must be replaced daily or after 5 tests, whichever occurs first.

Starling SpO2 Cable and Finger Probe Set is designed for use with Starling Monitor. One is included with the Starling SpO2 Module.

A/B/G/N Battery

The QNRG+ ICU Gas Sampling Pack Is required for VENT mode testing with the QNRG+ Metabolic Monitor and includes 1 each of the following single use items: Ventilator connector, Ventilator sampling line (with yellow connector) and a patient sampling line

Pharmacy Bottle Cap, Size E, 28 mm, Purple. Non-Sterile. ENFit Syringe Compatible