You searched for "skirt E PÅ PLATE"

The QNRG+ rolling Pole Cart, with Cylinder holder, allows easy transportation of the QNRG+ Metabolic Monitor, as well as its accessories and disposables, to the patient site

Automated Compounding Device Inlet. Vented, Micro-Volume Inlet for use with Small Vials. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP.

Photoprotective EXACTAMIX Empty EVA (ethylene vinyl acetate) Bag, 4000 mL. Manufactured by VALMED and distributed by Baxter Healthcare. Used for large-volume sterile solutions. Non-reopening clamp attached. Non-vented cap for the fill port included in sterile blister. For use with ExactaMix and ExactaMix Pro Compounder. Non-DEHP.

The Canopy Hose is used when CANOPY mode testing is performed with the QNRG+ Metabolic Monitor to connect the Canopy to the QNRG+ Monitor. The Hose is reusable and must be cleaned or replaced monthly (use of antibacterial/antiviral filter and canopy veils are also required but sold separately).

Sterile Tube Set-to-Bag Adapter, Internal Thread. Adapter with one female luer lock and one internal threaded connector connects a tube set with a male luer lock outlet. Sterile.

TPN EVA BAG, Valmed, 1000ML

Calibration syringe with a certified volume of 3 liters allows calibration of Q-NRG blower and external turbine.

Photoprotective EXACTAMIX Empty EVA (ethylene vinyl acetate) Bag, 5000 mL. Manufactured by VALMED and distributed by Baxter Healthcare. Used for large-volume sterile solutions. Non-reopening clamp attached. Non-vented cap for the fill port included in sterile blister. For use with ExactaMix and ExactaMix Pro Compounder. Non-DEHP.

Automated Compounding Device Inlet. Micro-Volume Inlet with Luer Lock End. For use with syringes. Tubing set with push-on connector on one end to attach to valve set and a luer lock on the opposite end to attach the source container. Sterile. Non-DEHP.

Automated Compounding Device Inlet. Vented, High-Volume Inlet for Non-Vented Bottles. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP.

Automated Compounding Device Inlet. Micro-Volume Inlet with Large Bore Spike. Tubing set with push-on connector on one end to attach to the valve set and a large bore spike on the opposite end to attach the source container. For use with EXACTAMIX Compounders. Sterile. Non-DEHP.

EVA Dual Chamber Empty Container, 1500 mL Total Capacity. 250 mL upper chamber, 1250 mL lower chamber. For use in the administration of intravenous solutions. Sterile. Non-DEHP. Material per IFU: Bag: Ethylene-vinyl acetate (EVA) Fill Port: Tube: EVA Connector/Cap: acrylonitrile butadiene styrene (ABS) Administration Port: EVA: DEHP-free polyvinyl chloride (PVC) Additive Port: Tube: EVA Septum: Poly-isoprene rubber Cap / Septum retaining ring: polypropylene Non-Reopening Clamp: Styrene-butadiene copolymer

When there is an active heated humidifier, the Ventilator Mode test can also be performed using the ICU Patient Connector and the Hydrophobic Filter. The ICU Patient Connector replaces the Standard Filter minimizing dead space and resistance added to the circuit and thus improving patient comfort. The Hydrophobic Filter is then required to prevent water condensation to get into the device, due to the absence of the Standard Filter. Reusable: must be replaced daily or after 5 tests, whichever occurs first.

The HME Heat Moisture Exchanger with Antibacterial/Antiviral filter, with a luer lock port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit does not have an active humidifier

The QNRG+ Calibration gas mix is a proprietary mix used for the monthly calibration of the QNRG+ Metabolic Monitor

EVA Dual Chamber Empty Container, 3000 mL Total Capacity. 500 mL upper chamber, 2500 mL lower chamber. For use in the administration of intravenous solutions. Sterile. Non-DEHP. Material per IFU: Bag: Ethylene-vinyl acetate (EVA) Fill Port: Tube: EVA Connector/Cap: acrylonitrile butadiene styrene (ABS) Administration Port: EVA: DEHP-free polyvinyl chloride (PVC) Additive Port: Tube: EVA Septum: Poly-isoprene rubber Cap / Septum retaining ring: polypropylene Non-Reopening Clamp: Styrene-butadiene copolymer