You searched for "ENT SURGICAL TUBE ACCESSorIES"

Sterile Tube Set-to-Bag Adapter, Internal Thread. Adapter with one female luer lock and one internal threaded connector connects a tube set with a male luer lock outlet. Sterile.

Automated Compounding Device Inlet. Vented, Micro-Volume Inlet for use with Small Vials. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP.

Automated Compounding Device Inlet. Vented, High-Volume Inlet for Non-Vented Bottles. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP.

Automated Compounding Device Inlet. Non-Vented High Volume Inlet for bags or vented bottles. Tubing sets with push-on connector on one end (to attach to the fluid selector valve) and a spike or other appropriate connector on the opposite end to attach the source container. Sterile. Non-DEHP.

When there is an active heated humidifier, the Ventilator Mode test can also be performed using the ICU Patient Connector and the Hydrophobic Filter. The ICU Patient Connector replaces the Standard Filter minimizing dead space and resistance added to the circuit and thus improving patient comfort. The Hydrophobic Filter is then required to prevent water condensation to get into the device, due to the absence of the Standard Filter. Reusable: must be replaced daily or after 5 tests, whichever occurs first.

The Antibacterial/Antiviral filter, with a luer lock gas sample port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit has an active humidifier

The QNRG+ rolling Pole Cart, with Cylinder holder, allows easy transportation of the QNRG+ Metabolic Monitor, as well as its accessories and disposables, to the patient site

NEEDLE PORT ADAPTEREXTERNAL THREAD

EVA Dual Chamber Empty Container, 1500 mL Total Capacity. 250 mL upper chamber, 1250 mL lower chamber. For use in the administration of intravenous solutions. Sterile. Non-DEHP. Material per IFU: Bag: Ethylene-vinyl acetate (EVA) Fill Port: Tube: EVA Connector/Cap: acrylonitrile butadiene styrene (ABS) Administration Port: EVA: DEHP-free polyvinyl chloride (PVC) Additive Port: Tube: EVA Septum: Poly-isoprene rubber Cap / Septum retaining ring: polypropylene Non-Reopening Clamp: Styrene-butadiene copolymer

EVA Dual Chamber Empty Container, 3000 mL Total Capacity. 500 mL upper chamber, 2500 mL lower chamber. For use in the administration of intravenous solutions. Sterile. Non-DEHP. Material per IFU: Bag: Ethylene-vinyl acetate (EVA) Fill Port: Tube: EVA Connector/Cap: acrylonitrile butadiene styrene (ABS) Administration Port: EVA: DEHP-free polyvinyl chloride (PVC) Additive Port: Tube: EVA Septum: Poly-isoprene rubber Cap / Septum retaining ring: polypropylene Non-Reopening Clamp: Styrene-butadiene copolymer

Automated Compounding Device Inlet. Micro-Volume Inlet with Luer Lock End. For use with syringes. Tubing set with push-on connector on one end to attach to valve set and a luer lock on the opposite end to attach the source container. Sterile. Non-DEHP.

The single use filter is used when canopy mode or mask mode testing is performed with the QNRG+ Metabolic Monitor. The purpose of the filter is to avoid cross-contamination. Inquiries regarding PVC/DEHP status should be referred to COSMED.

The QNRG+ ICU Gas Sampling Pack Is required for VENT mode testing with the QNRG+ Metabolic Monitor and includes 1 each of the following single use items: Ventilator connector, Ventilator sampling line (with yellow connector) and a patient sampling line

Automated Compounding Device Inlet. Micro-Volume Inlet with Large Bore Spike. Tubing set with push-on connector on one end to attach to the valve set and a large bore spike on the opposite end to attach the source container. For use with EXACTAMIX Compounders. Sterile. Non-DEHP.

The QNRG+ Flow-REE (Pneumotech) is a single use flowmeter placed in series in the patient circuit, allows the in-line measurement of ventilatory parameters (Vt, RF and VE). Required for VENT mode testing of mechanichally intubated patients.

The Canopy Hood Kit (large size) is used for CANOPY mode testing with the QNRG+ Metabolic Monitor. The hood is reusable and must be cleaned after every use (use of the Canopy filter is required). Kit includes: Canopy Hood, Canopy Hose, and Canopy Backpack.

The Canopy Hose is used when CANOPY mode testing is performed with the QNRG+ Metabolic Monitor to connect the Canopy to the QNRG+ Monitor. The Hose is reusable and must be cleaned or replaced monthly (use of antibacterial/antiviral filter and canopy veils are also required but sold separately).

EXACTAMIX Large Bore Cap, Internal Thread. Threaded cap for closing container-filling tubes and bag ports. Sterile. Non-DEHP