You searched for "HOLTER"

The QNRG+ rolling Pole Cart, with Cylinder holder, allows easy transportation of the QNRG+ Metabolic Monitor, as well as its accessories and disposables, to the patient site

The Antibacterial/Antiviral filter, with a luer lock gas sample port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit has an active humidifier

The HME Heat Moisture Exchanger with Antibacterial/Antiviral filter, with a luer lock port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit does not have an active humidifier

The single use filter is used when canopy mode or mask mode testing is performed with the QNRG+ Metabolic Monitor. The purpose of the filter is to avoid cross-contamination. Inquiries regarding PVC/DEHP status should be referred to COSMED.

When there is an active heated humidifier, the Ventilator Mode test can also be performed using the ICU Patient Connector and the Hydrophobic Filter. The ICU Patient Connector replaces the Standard Filter minimizing dead space and resistance added to the

Air-Eliminating 1.2 Micron Solution Filter with Male Luer Lock Adapter. Approximate Volume 0.8 mL

USP 797 Compliant Capsule Filters 500, Filtration Membrane 0.8μm/0.2μm Supor® polyethersulfone membrane, Filtration Area 500cm². Used for large volume sterilization applications. Sterile Package.

Tamper Evident Oral Dispenser Cap. Three-part plastic cap used to indicate tampering on an EXACTAMED Oral Dispenser. Secure, non-sterile cap requires user to break off outer sleeve to dispense medication. A red ring remains in place, indicating the outer sleeve has been removed. Red

CHEMO-AIDE Dispensing Pin. Reconstitution/Dispensing Device with 0.2 Micron Hydrophobic/Oleophobic Air-Venting Filter and Female Luer Adapter. Non-DEHP, Non-PVC. Sterile package, Nonpyrogenic.

A disposable spray set consisting of 1 spray head, 1 dual-lumen connection tube consisting of a pressure line with a transparent sterile filter, a thinner sensing line with a blue sterile filter and clip to be attached to the double syringe system plunger for gas activation. The EASYSPRAY set delivers a thin, uniform film of fibrin sealant over wound surfaces. The EASYSPRAY Set is used in conjunction with a double syringe system and the EASYSPRAY Pressure Regulator Device. For Topical Use Only. Available in cases of 10.

The Canopy Hood Kit (large size) is used for CANOPY mode testing with the QNRG+ Metabolic Monitor. The hood is reusable and must be cleaned after every use (use of the Canopy filter is required). Kit includes: Canopy Hood, Canopy Hose, and Canopy Backpack.

The Canopy Hose is used when CANOPY mode testing is performed with the QNRG+ Metabolic Monitor to connect the Canopy to the QNRG+ Monitor. The Hose is reusable and must be cleaned or replaced monthly (use of antibacterial/antiviral filter and canopy veils are also required but sold separately).

REPEATER Pump Bag Pole. Stainless steel pole connects to the REPEATER Pump to hold a bag and tube set. Insert the straight length of pole into the vertical mount hole, adjust to desired height, and tighten thumbscrew.