You searched for "rear than P15"

A disposable spray set flexible applicator that can spray in any direction and delivers a thin layer of combined materials. The 360 FlexTip Applicator set includes an endoscopic applicator tip, tear apart tubing for gas inlet and vent tubing with filters. Applicator is designed for use with the DUPLOSPRAY MIS Regulator.

TPN EVA BAG, Valmed, 1000ML

TPN EVA BAG, Valmed, 2000ML

When there is an active heated humidifier, the Ventilator Mode test can also be performed using the ICU Patient Connector and the Hydrophobic Filter. The ICU Patient Connector replaces the Standard Filter minimizing dead space and resistance added to the circuit and thus improving patient comfort. The Hydrophobic Filter is then required to prevent water condensation to get into the device, due to the absence of the Standard Filter. Reusable: must be replaced daily or after 5 tests, whichever occurs first.

The HME Heat Moisture Exchanger with Antibacterial/Antiviral filter, with a luer lock port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit does not have an active humidifier

Enteral Syringe with ENFit Connector 0.5 mL, Clear, Non-Sterile, with orange plunger

The Starling RRT bag is a portable bag that holds all the essentials for treating a hypotension emergency, including: SpO2, BP and IV access supplies. The Starling Monitor can be operated through the transparent front cover.

A disposable spray set applicator made of a rigid stainless steel cannula, tubing set and replaceable tip. The DUPLOSPRAY MIS Applicator delivers a thin, uniform film spray for maximum product utilization and broad area coverage. Applicator is designed for use with the DUPLOSPRAY MIS Regulator

MARK-A-DOSE Label, Clear Pressure Sensitive Adhesive Label, 2" x 0.5", For Use with EXACTAMED Oral Dispenser (1000/Case)

Oral Labels. Pre-printed Pin-feed Labels for Identification of Oral Medications. “ORAL” imprint in large, faded pink color letters. 2" x 0.5". (50 x 15 mm). (1000/Case)

The Antibacterial/Antiviral filter, with a luer lock gas sample port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit has an active humidifier

A disposable spray set applicator made of a rigid stainless steel cannula, tubing set and replaceable tip.The DUPLOSPRAY MIS Applicator delivers a thin, uniform spray for maximum product utilization and broad area coverage. Applicator is designed for use with the DUPLOSPRAY MIS Regulator.

10 pack of delivery tips for PREVELEAK Surgical Sealant. These tips are the same tips that are included with the PREVELEAK 4mL Surgical Sealant

Three Lead Parenteral Nutrition Transfer Set. Intended for use in the manual compounding of parenteral nutrition solutions or emulsions. Three vented spikes with threaded bag connector. Set connects with EXACTAMIX compounding bags. Product is not made

Starling sensors can be placed anywhere on the chest or back as long as two are positioned above and below the heart. Sensors should be replaced every 48 hours. Perform a re-calibration after sensor replacement and once daily.

Starling sensors can be placed anywhere on the chest or back as long as two are positioned above and below the heart. Sensors should be replaced every 48 hours. Perform a re-calibration after sensor replacement and once daily.

REPEATER Pump Syringe Filling Fixture. Holds pump tube set for filling single syringes or other luer devices. Suction feet hold the fixture securely to base of laminar flow hood. Clear anodized aluminum, 2” x 2.5” x 3.5’’ (51 mm x 64 mm x 89 mm)

PHARMACY PACK CLEAR 20ML