You searched for "refer than P15"

A disposable spray set flexible applicator that can spray in any direction and delivers a thin layer of combined materials. The 360 FlexTip Applicator set includes an endoscopic applicator tip, tear apart tubing for gas inlet and vent tubing with filters. Applicator is designed for use with the DUPLOSPRAY MIS Regulator.

When there is an active heated humidifier, the Ventilator Mode test can also be performed using the ICU Patient Connector and the Hydrophobic Filter. The ICU Patient Connector replaces the Standard Filter minimizing dead space and resistance added to the circuit and thus improving patient comfort. The Hydrophobic Filter is then required to prevent water condensation to get into the device, due to the absence of the Standard Filter. Reusable: must be replaced daily or after 5 tests, whichever occurs first.

The Starling RRT bag is a portable bag that holds all the essentials for treating a hypotension emergency, including: SpO2, BP and IV access supplies. The Starling Monitor can be operated through the transparent front cover.

The QNRG+ Flow-REE (Pneumotech) is a single use flowmeter placed in series in the patient circuit, allows the in-line measurement of ventilatory parameters (Vt, RF and VE). Required for VENT mode testing of mechanichally intubated patients.

Oral Labels. Pre-printed Pin-feed Labels for Identification of Oral Medications. “ORAL” imprint in large, faded pink color letters. 2" x 0.5". (50 x 15 mm). (1000/Case)

The Antibacterial/Antiviral filter, with a luer lock gas sample port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit has an active humidifier

10 pack of delivery tips for PREVELEAK Surgical Sealant. These tips are the same tips that are included with the PREVELEAK 4mL Surgical Sealant

TPN EVA BAG, Valmed, 1000ML

TPN EVA BAG, Valmed, 2000ML

PERI-STRIPS DRY with VERITAS Collagen Matrix with SECURE GRIP Technology THIN (Intuitive SureForm 60mm for da Vinci X and da Vinci Xi) (Medtronic Endo GIA Universal Straight 60mm) (Medtronic Endo GIA Universal Roticulator 60mm) (Medtronic Endo GIA Reloads with 60mm Tri-Staple Technology) (Unit of 6)

The single use filter is used when canopy mode or mask mode testing is performed with the QNRG+ Metabolic Monitor. The purpose of the filter is to avoid cross-contamination. Inquiries regarding PVC/DEHP status should be referred to COSMED.

A disposable spray set applicator made of a rigid stainless steel cannula, tubing set and replaceable tip. The DUPLOSPRAY MIS Applicator delivers a thin, uniform film spray for maximum product utilization and broad area coverage. Applicator is designed for use with the DUPLOSPRAY MIS Regulator

The HME Heat Moisture Exchanger with Antibacterial/Antiviral filter, with a luer lock port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit does not have an active humidifier

Automated Compounding Device Inlet. Vented, High-Volume Inlet for Non-Vented Bottles. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP.

A single use veil is used when CANOPY mode testing is performed with the QNRG+ Metabolic Monitor to enclose the CANOPY and protect from air leaks during patient testing

Automated Compounding Device Inlet. Vented, Micro-Volume Inlet for use with Small Vials. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP.

The Canopy Hose is used when CANOPY mode testing is performed with the QNRG+ Metabolic Monitor to connect the Canopy to the QNRG+ Monitor. The Hose is reusable and must be cleaned or replaced monthly (use of antibacterial/antiviral filter and canopy veils are also required but sold separately).

Automated Compounding Device Inlet. Micro-Volume Inlet with Large Bore Spike. Tubing set with push-on connector on one end to attach to the valve set and a large bore spike on the opposite end to attach the source container. For use with EXACTAMIX Compounders. Sterile. Non-DEHP.