You searched for "refer than p15"

When there is an active heated humidifier, the Ventilator Mode test can also be performed using the ICU Patient Connector and the Hydrophobic Filter. The ICU Patient Connector replaces the Standard Filter minimizing dead space and resistance added to the circuit and thus improving patient comfort. The Hydrophobic Filter is then required to prevent water condensation to get into the device, due to the absence of the Standard Filter. Reusable: must be replaced daily or after 5 tests, whichever occurs first.

The QNRG+ Flow-REE (Pneumotech) is a single use flowmeter placed in series in the patient circuit, allows the in-line measurement of ventilatory parameters (Vt, RF and VE). Required for VENT mode testing of mechanichally intubated patients.

CLINIMIX 5/15 sulfite-free (5% Amino Acid in 15% Dextrose) Injection 2000 mL in CLARITY Dual Chamber Container. NDC 0338-1099-04

The Antibacterial/Antiviral filter, with a luer lock gas sample port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit has an active humidifier

CLINIMIX E 5/15 sulfite-free (5% Amino Acid with Electrolytes in 15% Dextrose with Calcium) Injection 2000 mL in CLARITY Dual Chamber Container. NDC 0338-1123-04

TPN EVA BAG, Valmed, 1000ML

TPN EVA BAG, Valmed, 2000ML

The single use filter is used when canopy mode or mask mode testing is performed with the QNRG+ Metabolic Monitor. The purpose of the filter is to avoid cross-contamination. Inquiries regarding PVC/DEHP status should be referred to COSMED.

The HME Heat Moisture Exchanger with Antibacterial/Antiviral filter, with a luer lock port, is used for Ventilator mode testing with the QNRG+ Metabolic Monitor when the ventilator circuit does not have an active humidifier

Automated Compounding Device Inlet. Vented, High-Volume Inlet for Non-Vented Bottles. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP.

A single use veil is used when CANOPY mode testing is performed with the QNRG+ Metabolic Monitor to enclose the CANOPY and protect from air leaks during patient testing

Automated Compounding Device Inlet. Vented, Micro-Volume Inlet for use with Small Vials. Tubing set with push-on connector on one end to attach to the valve set and a vented spike on the opposite end to attach the source container. Sterile. Non-DEHP.

The Canopy Hose is used when CANOPY mode testing is performed with the QNRG+ Metabolic Monitor to connect the Canopy to the QNRG+ Monitor. The Hose is reusable and must be cleaned or replaced monthly (use of antibacterial/antiviral filter and canopy veils are also required but sold separately).

Automated Compounding Device Inlet. Micro-Volume Inlet with Large Bore Spike. Tubing set with push-on connector on one end to attach to the valve set and a large bore spike on the opposite end to attach the source container. For use with EXACTAMIX Compounders. Sterile. Non-DEHP.